Soligorsk, st. Zavodskaya, 4
Soligorsk, st. Zavodskaya, 4
Short description:
Roller presses 500/10.5-6B 1000 PG2S, 500/11.5-6A 1000 PG2S are used for pressing flotation fine-grained potassium chloride in the production of granulated fertilizers.
Basic characteristics:
Roller presses 500/10.5-6B 1000 PG2S, 500/11.5-6A 1000 PG2S are used for pressing flotation fine-grained potassium chloride in the production of granulated fertilizers.
500/10.5-6V 1000 PG2S
Diameter of pressing rolls, mm
1050
Working width of pressing organs, mm
1000
Adjustable gap between rollers, mm
8…20
Press productivity, t/hour (max)
120
Length
7830
Width
4210
Height
5537
Weight of roller press with screw feeder, kg, no more than
90000
Type of pressing organs
Profiled bandages
Drive
Engine power, kW
2x500
Engine speed, rpm
1490
Nominal voltage, V
6000
Peripheral speed of rolls, m/sec
0.83
Number of roll revolutions, rpm
15.23
Gear ratio of the roll drive gearbox
97,841
Type of protection
IP54; GOST 14254-96
Clamping hydraulics
Specific pressing force, kN/cm
70
Max. total pressing force, kN
7000
Preliminary pressure, bar
185
Working pressure, bar
248
Safety pressure, N/mm2
285
Nitrogen pressure, N/mm2
125
Performance characteristics:
Product form
tile
Average tile thickness, mm
20
Tile productivity, t/h
100
Tile density, g/cm
1.96-1.98
Temperature of loaded material, C
120-140
Humidity, %
0.1
Bulk density of loaded material, g/cm3
1.1-1.3
Cooling system, fluid consumption
For two rolls, m3/h
8
For two planetary gearboxes, m3/h
2x2
For four bearings, m3/h
2
Water pressure, bar (min/max)
4-10
Safety clutch
Switch-off torque, Nm
3900
Hydraulic pressure setting, bar
600
Screw feeder
Productivity, t/h, max
120
Number of revolutions, rpm (min/max)
15-90
500/11.5-6A 1000 PG2S
Diameter of pressing rolls, mm
1150
Working width of pressing organs, mm
1000
Adjustable gap between rollers, mm
9…17
Press productivity, t/hour (max)
140
Length
8050
Width
4210
Height
5581
Weight of roller press with screw feeder, kg, no more than
101500
Type of pressing organs
Profiled bandages
Drive
Engine power, kW
2x560
Engine speed, rpm
1490
Nominal voltage, V
6000
Peripheral speed of rolls, m/sec
0.97
Number of roll revolutions, rpm
16.14
Gear ratio of the roll drive gearbox
92,291
Type of protection
IP54; GOST 14254-96
Clamping hydraulics:
Specific pressing force, kN/cm
70
Max. total pressing force, kN
7000
Preliminary pressure, bar
185
Working pressure, bar
248
Safety pressure, N/mm2
285
Nitrogen pressure, N/mm2
125
Performance characteristics
Product form
tile
Average tile thickness, mm
20
Tile productivity, t/h
120
Tile density, g/cm3
1.96-1.98
Temperature of loaded material, C
120-140
Humidity, %
0.1
Bulk density of loaded material, g/cm3
1.1-1.3
Cooling system, fluid consumption
For two rolls, m3/h
8
For two planetary gearboxes, m3/h
2x2
For four bearings, m3/h
2
Water pressure, bar (min/max)
4-10
Safety clutch
Switch-off torque, Nm
4660
Hydraulic pressure setting, bar
650
Screw feeder
Productivity, t/h, max
140
Number of revolutions, rpm (min/max)
10-105
